Universal Laser Systems CLP-100NI-NPRT Manual do Utilizador descarregar pdf (Página 38)

When adequate pressure is applied to the Eccentric Knob dur-

ing assembly, the knob should have a moderate resistance to

turning. When assembled properly, the ink roller axle should be

feel rigid.

MAINTENANCE

5 - Install the Eccentric Knurled Knob and align the engraved

line on the knob with the “MAX” line on the Inking System

Cover. Set the ink roller axle on a small block of wood or

metal . The block used should be tall enough so the entire

assembly is supported by the ink roller axle (the Inking Sys-

tem Cover should not touch the table top).

FIGURE 78

FIGURE 79

6 - Press down firmly on the Eccentric Knurled Knob. While

holding pressure on the knob, tighten the two set screws.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44 45

Sem comentários

Universal Laser Systems CLP-100NI-NPRT Manual do Utilizador Página 38